Filters Sort results
Reset Apply
 | Dedicated Slicer For Cetus2. | 17 May, 2022 | Beta Release | |||
 | Dedicated Slicer for Cetus2. | 18 May, 2022 | Beta Release | |||
 | Required for Cetus2 operation when using with UP Studio 3.2.7 | 26 Dec, 2022 | Print Configuration (print settings) | |||
| Original Firmware of Kickstarter Cetus2. | 7 Apr, 2023 | Firmware and ROM | |||
| 1. Supported Gcode execution. 2. Fixed print stopping issue for some small-size models. 3. Fixed "Chamber too hot" error. | 7 Apr, 2023 | Firmware and ROM | |||
 | Print Profile for Cura 5.3 Plugin Requirement: Printer Settings (from Marketplace) | 7 Apr, 2023 | Slicer Profiles |
